[framed_box width=”” minheight=”” bgColor=”rgba(237,243,245,1)” borderColor=”#000000″ rounded=”true”] The following video shows where to install the hardwired push button for the Residential AutoHot® System. This also shows how to test it afterwards.

[tvideo type=”youtube” clip_id=”loTVFM9xk4s” autoplay=”true” loop=”true”]

This is one of the ones that the AutoHot determines when you ‘demand’ hot water. This is one type of activator for the on-demand recirculation system. Other options include wireless motion sensors and wireless push buttons.

Please note, the hardwired pushbutton will slide snugly into a 5/8″ hole. Oftentimes this will be drilled into the front of your cabinet, right by the sink.

For multiple buttons, view the following video, fast forward to the middle at about 2:36 to see the section on connecting multiple buttons. Please note, the crimp wire connectors are not included in the piece.

[tvideo type=”youtube” clip_id=”8byJTuwBmHw” autoplay=”false” loop=”true”]

 [/framed_box]